Housing stock
Dense mix of pre-1940 two- and three-family homes, postwar single-family infill along Outwater Lane, and newer multi-family on the Passaic River side.
Bricks · Bergen County
Bricks in Garfield, NJ
Home base. Our yard is at 89 Market Street — most Garfield jobs see the crew on site within the hour.
0Minute responseGarfield, NJ
Same-day site visit
Our yard is in this town
24-hour estimate
Written, no obligation
Bergen County
Garfield, NJ 07026
Licensed & insured
NJ #13VH10343500
About working in Garfield
What Garfield masonry actually looks like
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Common project types
The work we get called for most in Garfield, based on what the local building stock and site conditions tend to need.
- Brick front-stoop replacements on two-family homes
- Tuckpointing on pre-war duplex façades
- Short retaining walls along the river bluff
- Driveway tear-out and concrete replacement
Local site conditions
Conditions specific to Garfield that shape how we approach prep, drainage, and material choice on every job.
- Narrow lots and tight side-yard access — equipment staging is a real planning step
- Mixed building stock means matching mortar color and brick type matters even on small jobs
- Spring water table is high in the lower sections off Outwater
What we build
Bricks — what's included
New brick installation, repointing, chimney rebuilds, and façade restoration. We match historic mortar joints by tooled profile and color — that's how a tuckpointed wall reads as original instead of patched.
- Full-depth and partial-depth tuckpointing
- Mortar color and joint-profile matching on pre-1940 façades
- Lintel repair and replacement
- Brick replacement for spalled or salvaged courses
Historic-district approvals are the homeowner's responsibility — we'll prepare scope drawings to attach to the application.
Recent work in Garfield
What we've built right here for bricks customers
Photos of actual Garfield projects from the last two seasons. Every project on this strip was built by our in-house crew.
Fieldstone fireplace
Stone
Floor-to-Ceiling Fieldstone Fireplace
How we build it
Bricks — start to finish
The four stages we run on every bricks job. Same workflow whether it's a small fix or a full install.
1
Survey the façade
We photograph at scale and tap-test every brick face within reach. Spalled brick, cracked lintels, and joints that have lost more than 1/4 inch of mortar all get marked.
2
Match mortar and joint
We pull a joint sample, cross-check color in sunlight, and mix a small test patch on the building. Tooled to match the original profile — concave, V, struck, or beaded.
3
Rake, repoint, and replace
Failed joints raked to 3/4 inch depth (not deeper than 2× the joint width). New mortar pressed in two lifts. Spalled brick swapped course-by-course with salvaged or matched stock.
4
Clean and final pass
Brick face cleaned without acid wash where possible. Final walkthrough at street distance so you can see the work reads as part of the original wall.
Garfield questions
About bricks work in Garfield
The four things people actually want to know before they sign an estimate.
Why does mortar matching matter so much?
A wall with the wrong mortar will tell on itself from across the street. Modern Type S mortar is too hard for soft pre-1940 brick — it transfers stress to the brick face and causes spalling. The right mortar is softer than the brick around it on purpose.
Tuckpointing vs. repointing — what's the difference?
Repointing replaces failed mortar joints. Tuckpointing is a decorative technique that uses two mortar colors — a base coat plus a thin contrasting ribbon — to make joints look thinner than they are. Most jobs we do are repointing; true tuckpointing is rare and usually historic.
Do I need to repoint the whole façade?
Almost never. We spot-repoint where joints have actually failed and leave sound joints alone. Repointing sound mortar makes the wall look freshly patched. A good repoint job is invisible from twenty feet.
How long does brick repointing last?
A correctly matched repoint outlasts the surrounding wall — usually 50+ years. The failure mode isn't the new mortar; it's the original brick continuing to weather. We'll tell you which joints have another decade in them and which don't.
Nearby towns we serve
Other Bergen County towns we cover for bricks
Same crew, same workmanship warranty, short response time across the county.
Hackensack
12 minCounty seat. Older masonry stock means a lot of our Hackensack work is repointing and façade restoration on pre-war row houses.
View bricks in HackensackLodi
7 minFive minutes south of our yard. Lots of retaining-wall work along the Saddle River grade transitions.
View bricks in LodiRutherford
15 minWalkable neighborhoods with original 1920s brick. Most Rutherford jobs are tuckpointing and front-stoop replacements.
View bricks in RutherfordWallington
5 minAcross the Passaic River from Garfield — short jobs, fast response, often same-day site visits.
View bricks in WallingtonFair Lawn
18 minPost-war ranch and split-level stock. Driveway replacement and paver patio installs are the bulk of our Fair Lawn work.
View bricks in Fair LawnSaddle Brook
11 minA mix of mid-century homes and newer builds along Route 80. We handle both legacy chimney repairs and fresh paver work here.
View bricks in Saddle Brook
Free Estimate · Garfield, NJ
Ready to talk through your bricks project in Garfield?
We're already in town. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.
- Site visit booked within 24–48 hours
- 5-year written workmanship warranty
- Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869