Housing stock
Dense pre-1940 brick row houses, multi-family three-deckers, and warehouse conversions in the historic district near the Great Falls.
Pavers · Passaic County
Pavers in Paterson, NJ
Historic brick city. A lot of our Paterson work is full-façade restoration on pre-1940 row houses — that's where mortar-matching matters most.
16Min from yardPaterson, NJ
16-min drive
6 mi from Garfield yard
24-hour estimate
Written, no obligation
Passaic County
Paterson, NJ 07501
Licensed & insured
NJ #13VH10343500
About working in Paterson
What Paterson masonry actually looks like
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Common project types
The work we get called for most in Paterson, based on what the local building stock and site conditions tend to need.
- Full-façade brick restoration on row houses
- Lintel repair and steel angle replacement
- Mortar-matched repointing on pre-1900 buildings
- Brick stoop and rail rebuilds
Local site conditions
Conditions specific to Paterson that shape how we approach prep, drainage, and material choice on every job.
- Great Falls Historic District has design-review requirements — we prepare scope drawings
- Pre-1900 brick is hand-laid; modern brick replacement requires hunting matching salvage
- Lintels are typically wood or wrought iron — replacement with stainless steel is the long-term move
What we build
Pavers — what's included
Patios, driveways, walkways, and pool decks. The job is in the base: 6–8 in. of compacted process, geotextile fabric on soft soils, and polymeric joint sand that locks the surface without weeds.
- Herringbone, basketweave, and running-bond patterns
- Permeable paver driveways for stormwater compliance
- Soldier-course borders and cut radius edges
- Polymeric jointing and edge restraint
Recent work in Paterson
What we've built right here for pavers customers
Photos of actual Paterson projects from the last two seasons. Every project on this strip was built by our in-house crew.
Tuckpointed brick façade
Brick
1920s Row-House Façade Restoration
How we build it
Pavers — start to finish
The four stages we run on every pavers job. Same workflow whether it's a small fix or a full install.
1
Layout and excavation
String lines on the design. Excavation to 8–12 inches below finish grade — deeper for driveways. Geotextile fabric on the subgrade if soils are soft or wet.
2
Compacted base
3/4-inch clean stone placed in 2-inch lifts, each lift compacted with a plate compactor before the next goes in. This is where 80% of the long-term performance lives.
3
Bedding and laying
1 inch of bedding sand screeded to grade. Pavers laid in the chosen pattern (herringbone for driveways — it locks under load). Soldier-course border tied to the field.
4
Edge, joints, and compact
Snap-edge restraint spiked into the base. Polymeric joint sand swept in, blown clean, then misted to activate. Final pass with the compactor over a roller mat sets the field flush.
Paterson questions
About pavers work in Paterson
The four things people actually want to know before they sign an estimate.
How long does a paver installation take?
A typical 400 sq ft patio is 5–7 working days. A driveway runs 1–2 weeks depending on size and how much we have to dig out. Weather and base condition are the big variables — soft subgrades take longer to compact correctly.
Polymeric sand vs. regular sand for joints?
Polymeric. It locks the joints, stays put through rain and snowblowing, and stops weeds from rooting. Regular sand washes out within a season. Polymeric needs to be installed dry on a dry surface, then misted — installer error here is the most common reason a paver job fails early.
Will pavers heave in the winter?
Not if the base is right. The base has to drain freely so water doesn't sit and freeze under the field. Bedding sand depth needs to be uniform (1 inch — not more). Joints need polymeric sand keeping moisture out of the base.
Can pavers go over an existing concrete slab?
Sometimes — it depends on the slab's condition, drainage, and finish elevation. We have to add 1.5–2 inches of stack height, so steps and door thresholds become a problem. We'll tell you honestly whether it's worth it for your slab or whether you're better off tearing out and starting on a proper base.
Nearby towns we serve
Other Passaic County towns we cover for pavers
Same crew, same workmanship warranty, short response time across the county.
Clifton
10 minBordering Garfield to the west. Heavy demand for bluestone steps and front-yard masonry across the older Athenia and Lakeview sections.
View pavers in CliftonWayne
22 minSuburban lots with longer driveways and larger backyard patios. Permeable paver driveways are increasingly common here.
View pavers in WaynePassaic
9 minDense, mixed-use streets across the river. Most Passaic work is repointing and chimney repair on multi-family brick buildings.
View pavers in Passaic
Free Estimate · Paterson, NJ
Ready to talk through your pavers project in Paterson?
We're 16 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.
- Site visit booked within 24–48 hours
- 5-year written workmanship warranty
- Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869