Housing stock
Mix of two-family and small single-family homes from the 1920s–1950s; tight lots, narrow side yards.
Across the Passaic River from Garfield — short jobs, fast response, often same-day site visits.
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Mix of two-family and small single-family homes from the 1920s–1950s; tight lots, narrow side yards.
The work we get called for most in Wallington, based on what the local building stock and site conditions tend to need.
Conditions specific to Wallington that shape how we approach prep, drainage, and material choice on every job.
Patios, driveways, walkways, and pool decks. The job is in the base: 6–8 in. of compacted process, geotextile fabric on soft soils, and polymeric joint sand that locks the surface without weeds.
The four stages we run on every pavers job. Same workflow whether it's a small fix or a full install.
String lines on the design. Excavation to 8–12 inches below finish grade — deeper for driveways. Geotextile fabric on the subgrade if soils are soft or wet.
3/4-inch clean stone placed in 2-inch lifts, each lift compacted with a plate compactor before the next goes in. This is where 80% of the long-term performance lives.
1 inch of bedding sand screeded to grade. Pavers laid in the chosen pattern (herringbone for driveways — it locks under load). Soldier-course border tied to the field.
Snap-edge restraint spiked into the base. Polymeric joint sand swept in, blown clean, then misted to activate. Final pass with the compactor over a roller mat sets the field flush.
The four things people actually want to know before they sign an estimate.
A typical 400 sq ft patio is 5–7 working days. A driveway runs 1–2 weeks depending on size and how much we have to dig out. Weather and base condition are the big variables — soft subgrades take longer to compact correctly.
Polymeric. It locks the joints, stays put through rain and snowblowing, and stops weeds from rooting. Regular sand washes out within a season. Polymeric needs to be installed dry on a dry surface, then misted — installer error here is the most common reason a paver job fails early.
Not if the base is right. The base has to drain freely so water doesn't sit and freeze under the field. Bedding sand depth needs to be uniform (1 inch — not more). Joints need polymeric sand keeping moisture out of the base.
Sometimes — it depends on the slab's condition, drainage, and finish elevation. We have to add 1.5–2 inches of stack height, so steps and door thresholds become a problem. We'll tell you honestly whether it's worth it for your slab or whether you're better off tearing out and starting on a proper base.
Same crew, same workmanship warranty, short response time across the county.
Home base. Our yard is at 89 Market Street — most Garfield jobs see the crew on site within the hour.
View pavers in GarfieldCounty seat. Older masonry stock means a lot of our Hackensack work is repointing and façade restoration on pre-war row houses.
View pavers in HackensackFive minutes south of our yard. Lots of retaining-wall work along the Saddle River grade transitions.
View pavers in LodiWalkable neighborhoods with original 1920s brick. Most Rutherford jobs are tuckpointing and front-stoop replacements.
View pavers in RutherfordPost-war ranch and split-level stock. Driveway replacement and paver patio installs are the bulk of our Fair Lawn work.
View pavers in Fair LawnA mix of mid-century homes and newer builds along Route 80. We handle both legacy chimney repairs and fresh paver work here.
View pavers in Saddle BrookWe're 5 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.