Housing stock
Pre-1940 multi-family brick buildings, three- and four-deckers, and walkup conversions; some prewar single-family on the Clifton border.
Stone · Passaic County
Stone in Passaic, NJ
Dense, mixed-use streets across the river. Most Passaic work is repointing and chimney repair on multi-family brick buildings.
9Min from yardPassaic, NJ
9-min drive
3 mi from Garfield yard
24-hour estimate
Written, no obligation
Passaic County
Passaic, NJ 07055
Licensed & insured
NJ #13VH10343500
About working in Passaic
What Passaic masonry actually looks like
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Common project types
The work we get called for most in Passaic, based on what the local building stock and site conditions tend to need.
- Repointing on multi-family brick façades
- Lintel repair above storefront windows
- Chimney crown replacements
- Front-stoop concrete repair for two- and three-deckers
Local site conditions
Conditions specific to Passaic that shape how we approach prep, drainage, and material choice on every job.
- Tight urban lots — staging trucks requires coordination with parking enforcement
- Multi-family buildings often need building-department sign-off for façade work
- Lintels above original storefronts are commonly rotted or rusted — full replacement
What we build
Stone — what's included
Natural stone veneer, fireplace surrounds, pillars, and accent walls. We work in bluestone, fieldstone, ledgestone, and limestone — material is picked at the yard with you so the blend matches the house before a single piece is set.
- Dry-stack and mortared natural stone veneer
- Floor-to-ceiling fireplace surrounds with hearth and mantle
- Stone pillars, columns, and entry monuments
- Bluestone caps, treads, and pool coping
How we build it
Stone — start to finish
The four stages we run on every stone job. Same workflow whether it's a small fix or a full install.
1
Yard visit and blend
We meet you at the stone yard. Pull a sample pallet, lay it out on the ground, talk about colors and how the blend reads against your house. You leave knowing what's on the truck.
2
Substrate prep
Veneer needs a sound substrate — sheathing, weather-resistive barrier, galvanized lath, and a 1/2-inch scratch coat. Skipping any of those is how veneer walls fail in 5 years.
3
Stone selection and set
Stones sorted on the ground by face, size, and color before any setting. We pick each stone for its place in the wall — corners, transitions, and feature pieces placed first.
4
Joint, cap, and wash
Joints tooled to the chosen profile (raked, struck, or full-bedded depending on the look). Cap or mantle set last. Final wash with masonry detergent — no muriatic acid on natural stone.
Passaic questions
About stone work in Passaic
The four things people actually want to know before they sign an estimate.
Natural stone vs. cultured (manufactured) stone?
Natural stone is real stone — heavier, more variation, and ages well. Cultured stone is concrete cast in molds. From 20 feet they read similar. Up close, cultured stone repeats patterns and never weathers the same way. We install both; we'll tell you honestly when cultured is the right call (often for budget or a non-loadbearing accent wall).
Can I install stone veneer myself?
You can. Most homeowner failures are at the substrate (no WRB, wrong lath, scratch coat too thin) or at the cap (water gets in behind unsealed copings and shoves the wall off). If you DIY, the substrate is where to spend the time.
How heavy is full-bed stone veneer?
Roughly 40–50 lbs per square foot. That requires a shelf angle or a stem wall to carry the load. Thin veneer (1.5-inch cuts) is around 15 lbs and can hang on a properly prepared sheathed wall without a ledge.
Does stone veneer need maintenance?
Very little. Joints stay sound for 30+ years. Cap stones may need a re-bed at the 20-year mark if you're in a high-freeze location. Otherwise — wash it once a decade and you're done.
Nearby towns we serve
Other Passaic County towns we cover for stone
Same crew, same workmanship warranty, short response time across the county.
Clifton
10 minBordering Garfield to the west. Heavy demand for bluestone steps and front-yard masonry across the older Athenia and Lakeview sections.
View stone in CliftonPaterson
16 minHistoric brick city. A lot of our Paterson work is full-façade restoration on pre-1940 row houses — that's where mortar-matching matters most.
View stone in PatersonWayne
22 minSuburban lots with longer driveways and larger backyard patios. Permeable paver driveways are increasingly common here.
View stone in Wayne
Free Estimate · Passaic, NJ
Ready to talk through your stone project in Passaic?
We're 9 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.
- Site visit booked within 24–48 hours
- 5-year written workmanship warranty
- Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869