Housing stock
Dense pre-1940 brick row houses, multi-family three-deckers, and warehouse conversions in the historic district near the Great Falls.
Historic brick city. A lot of our Paterson work is full-façade restoration on pre-1940 row houses — that's where mortar-matching matters most.
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Dense pre-1940 brick row houses, multi-family three-deckers, and warehouse conversions in the historic district near the Great Falls.
The work we get called for most in Paterson, based on what the local building stock and site conditions tend to need.
Conditions specific to Paterson that shape how we approach prep, drainage, and material choice on every job.
Driveways, walkways, slabs, and footings. We compact the subgrade, set the rebar or mesh per the application, and place clean control joints — the joints are what stop concrete from cracking where it wants to.
Photos of actual Paterson projects from the last two seasons. Every project on this strip was built by our in-house crew.
The four stages we run on every concrete work job. Same workflow whether it's a small fix or a full install.
Strip topsoil. Cut to depth (typically 8 inches for a residential driveway). Compact subgrade in lifts with a plate compactor — this is the step that decides whether the pour lasts.
Form boards staked and leveled. 4 inches of compacted 3/4-inch clean stone base. Rebar or mesh placed on chairs so reinforcement actually sits inside the slab, not on the dirt.
Concrete placed, screeded, bull-floated. We hand-edge, broom-finish (or stamp / expose), and saw-cut control joints at proper spacing — typically every 8–10 feet for a residential slab.
Cure compound the same day. Stay off it for 24 hours, light traffic at 72, full load at 28 days. Optional densifier sealer in week two locks out road salt.
The four things people actually want to know before they sign an estimate.
Concrete is going to crack — we control where. Saw-cut control joints at proper spacing tell the slab where to crack, so the cracks land inside the joints and read as joints instead of failures. A slab without joints cracks anyway, just randomly.
Stamped is a textured top layer pressed into wet concrete — gives you a brick or slate look at a concrete price. Exposed aggregate washes off the cement paste to reveal the stone underneath. Stamped looks more decorative; exposed aggregate is grippier and reads more contemporary.
4 inches over a compacted base for a residential driveway with passenger vehicles. 6 inches if you have a heavy truck, RV, or trailer. The base matters as much as the slab thickness — a 6-inch slab on bad subgrade fails before a 4-inch slab on a proper base.
Yes — but not in year one. Concrete needs to cure and finish off-gassing first. A breathable penetrating sealer in year two protects against deicing salts (a real issue in North Jersey), and we'll come back to apply it if you want.
Same crew, same workmanship warranty, short response time across the county.
Bordering Garfield to the west. Heavy demand for bluestone steps and front-yard masonry across the older Athenia and Lakeview sections.
View concrete work in CliftonSuburban lots with longer driveways and larger backyard patios. Permeable paver driveways are increasingly common here.
View concrete work in WayneDense, mixed-use streets across the river. Most Passaic work is repointing and chimney repair on multi-family brick buildings.
View concrete work in PassaicWe're 16 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.