Housing stock
1960s–1980s suburban single-family on half-acre to one-acre lots; some newer infill builds; a handful of older homes near Wayne Hills.
Concrete Work · Passaic County
Concrete Work in Wayne, NJ
Suburban lots with longer driveways and larger backyard patios. Permeable paver driveways are increasingly common here.
22Min from yardWayne, NJ
22-min drive
10 mi from Garfield yard
24-hour estimate
Written, no obligation
Passaic County
Wayne, NJ 07470
Licensed & insured
NJ #13VH10343500
About working in Wayne
What Wayne masonry actually looks like
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Common project types
The work we get called for most in Wayne, based on what the local building stock and site conditions tend to need.
- Long paver driveways (often 60–100 ft)
- Large backyard paver patios with outdoor kitchen platforms
- Stone veneer fireplace surrounds for great rooms
- Permeable pavers for stormwater compliance
Local site conditions
Conditions specific to Wayne that shape how we approach prep, drainage, and material choice on every job.
- Lakes in town (Pines, Packanack) trigger stormwater rules — permeable paver options come up often
- Long driveways drift over 1" of fall per 10 ft and benefit from re-grading during reinstall
- Wayne's permit office is at the Municipal Complex on Valley Road — we work with their inspectors regularly
What we build
Concrete Work — what's included
Driveways, walkways, slabs, and footings. We compact the subgrade, set the rebar or mesh per the application, and place clean control joints — the joints are what stop concrete from cracking where it wants to.
- Broom-finish driveways and aprons, 4 in. residential / 6 in. heavy-load
- Exposed aggregate patios and walkways
- Stamped and integrally colored concrete
- Footings for porches, garages, generators, and outdoor kitchens
Recent work in Wayne
What we've built right here for concrete work customers
Photos of actual Wayne projects from the last two seasons. Every project on this strip was built by our in-house crew.
Herringbone paver driveway
Pavers
1,800 sq ft Herringbone Paver Driveway
How we build it
Concrete Work — start to finish
The four stages we run on every concrete work job. Same workflow whether it's a small fix or a full install.
1
Excavation & subgrade
Strip topsoil. Cut to depth (typically 8 inches for a residential driveway). Compact subgrade in lifts with a plate compactor — this is the step that decides whether the pour lasts.
2
Form, base, and reinforcement
Form boards staked and leveled. 4 inches of compacted 3/4-inch clean stone base. Rebar or mesh placed on chairs so reinforcement actually sits inside the slab, not on the dirt.
3
Pour, screed, and finish
Concrete placed, screeded, bull-floated. We hand-edge, broom-finish (or stamp / expose), and saw-cut control joints at proper spacing — typically every 8–10 feet for a residential slab.
4
Cure and seal
Cure compound the same day. Stay off it for 24 hours, light traffic at 72, full load at 28 days. Optional densifier sealer in week two locks out road salt.
Wayne questions
About concrete work work in Wayne
The four things people actually want to know before they sign an estimate.
Will it crack?
Concrete is going to crack — we control where. Saw-cut control joints at proper spacing tell the slab where to crack, so the cracks land inside the joints and read as joints instead of failures. A slab without joints cracks anyway, just randomly.
Stamped vs. exposed aggregate?
Stamped is a textured top layer pressed into wet concrete — gives you a brick or slate look at a concrete price. Exposed aggregate washes off the cement paste to reveal the stone underneath. Stamped looks more decorative; exposed aggregate is grippier and reads more contemporary.
How thick should my driveway be?
4 inches over a compacted base for a residential driveway with passenger vehicles. 6 inches if you have a heavy truck, RV, or trailer. The base matters as much as the slab thickness — a 6-inch slab on bad subgrade fails before a 4-inch slab on a proper base.
Should I seal new concrete?
Yes — but not in year one. Concrete needs to cure and finish off-gassing first. A breathable penetrating sealer in year two protects against deicing salts (a real issue in North Jersey), and we'll come back to apply it if you want.
Nearby towns we serve
Other Passaic County towns we cover for concrete work
Same crew, same workmanship warranty, short response time across the county.
Clifton
10 minBordering Garfield to the west. Heavy demand for bluestone steps and front-yard masonry across the older Athenia and Lakeview sections.
View concrete work in CliftonPaterson
16 minHistoric brick city. A lot of our Paterson work is full-façade restoration on pre-1940 row houses — that's where mortar-matching matters most.
View concrete work in PatersonPassaic
9 minDense, mixed-use streets across the river. Most Passaic work is repointing and chimney repair on multi-family brick buildings.
View concrete work in Passaic
Free Estimate · Wayne, NJ
Ready to talk through your concrete work project in Wayne?
We're 22 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.
- Site visit booked within 24–48 hours
- 5-year written workmanship warranty
- Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869