Housing stock
Mostly post-1945 single-family on small lots; some pre-war two-families along Garibaldi Avenue and Hackensack Street.
Stone · Bergen County
Stone in Lodi, NJ
Five minutes south of our yard. Lots of retaining-wall work along the Saddle River grade transitions.
7Min from yardLodi, NJ
7-min drive
2 mi from Garfield yard
24-hour estimate
Written, no obligation
Bergen County
Lodi, NJ 07644
Licensed & insured
NJ #13VH10343500
About working in Lodi
What Lodi masonry actually looks like
Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.
Common project types
The work we get called for most in Lodi, based on what the local building stock and site conditions tend to need.
- Segmental retaining walls on grade transitions
- Concrete driveway tear-out and replacement
- Paver walkways and rear patios
- Front-step replacements for ranch and Cape homes
Local site conditions
Conditions specific to Lodi that shape how we approach prep, drainage, and material choice on every job.
- Significant grade changes near the Saddle River require proper drainage on every wall
- Postwar driveways are often 3 inches thick over poor subgrade — full tear-out is usually the right call
- Frost heaves are common on west-side lots that drain toward the river
What we build
Stone — what's included
Natural stone veneer, fireplace surrounds, pillars, and accent walls. We work in bluestone, fieldstone, ledgestone, and limestone — material is picked at the yard with you so the blend matches the house before a single piece is set.
- Dry-stack and mortared natural stone veneer
- Floor-to-ceiling fireplace surrounds with hearth and mantle
- Stone pillars, columns, and entry monuments
- Bluestone caps, treads, and pool coping
Recent work in Lodi
What we've built right here for stone customers
Photos of actual Lodi projects from the last two seasons. Every project on this strip was built by our in-house crew.
Stacked stone retaining wall
Masonry
120-Foot Stacked Stone Retaining Wall
How we build it
Stone — start to finish
The four stages we run on every stone job. Same workflow whether it's a small fix or a full install.
1
Yard visit and blend
We meet you at the stone yard. Pull a sample pallet, lay it out on the ground, talk about colors and how the blend reads against your house. You leave knowing what's on the truck.
2
Substrate prep
Veneer needs a sound substrate — sheathing, weather-resistive barrier, galvanized lath, and a 1/2-inch scratch coat. Skipping any of those is how veneer walls fail in 5 years.
3
Stone selection and set
Stones sorted on the ground by face, size, and color before any setting. We pick each stone for its place in the wall — corners, transitions, and feature pieces placed first.
4
Joint, cap, and wash
Joints tooled to the chosen profile (raked, struck, or full-bedded depending on the look). Cap or mantle set last. Final wash with masonry detergent — no muriatic acid on natural stone.
Lodi questions
About stone work in Lodi
The four things people actually want to know before they sign an estimate.
Natural stone vs. cultured (manufactured) stone?
Natural stone is real stone — heavier, more variation, and ages well. Cultured stone is concrete cast in molds. From 20 feet they read similar. Up close, cultured stone repeats patterns and never weathers the same way. We install both; we'll tell you honestly when cultured is the right call (often for budget or a non-loadbearing accent wall).
Can I install stone veneer myself?
You can. Most homeowner failures are at the substrate (no WRB, wrong lath, scratch coat too thin) or at the cap (water gets in behind unsealed copings and shoves the wall off). If you DIY, the substrate is where to spend the time.
How heavy is full-bed stone veneer?
Roughly 40–50 lbs per square foot. That requires a shelf angle or a stem wall to carry the load. Thin veneer (1.5-inch cuts) is around 15 lbs and can hang on a properly prepared sheathed wall without a ledge.
Does stone veneer need maintenance?
Very little. Joints stay sound for 30+ years. Cap stones may need a re-bed at the 20-year mark if you're in a high-freeze location. Otherwise — wash it once a decade and you're done.
Nearby towns we serve
Other Bergen County towns we cover for stone
Same crew, same workmanship warranty, short response time across the county.
Garfield
0 minHome base. Our yard is at 89 Market Street — most Garfield jobs see the crew on site within the hour.
View stone in GarfieldHackensack
12 minCounty seat. Older masonry stock means a lot of our Hackensack work is repointing and façade restoration on pre-war row houses.
View stone in HackensackRutherford
15 minWalkable neighborhoods with original 1920s brick. Most Rutherford jobs are tuckpointing and front-stoop replacements.
View stone in RutherfordWallington
5 minAcross the Passaic River from Garfield — short jobs, fast response, often same-day site visits.
View stone in WallingtonFair Lawn
18 minPost-war ranch and split-level stock. Driveway replacement and paver patio installs are the bulk of our Fair Lawn work.
View stone in Fair LawnSaddle Brook
11 minA mix of mid-century homes and newer builds along Route 80. We handle both legacy chimney repairs and fresh paver work here.
View stone in Saddle Brook
Free Estimate · Lodi, NJ
Ready to talk through your stone project in Lodi?
We're 7 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.
- Site visit booked within 24–48 hours
- 5-year written workmanship warranty
- Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869