89 Market Street, Garfield, NJ 07026 Mon–Sat 7am–6pm
NJ Lic. #13VH10343500 ardianguzi@yahoo.com
Stone · Bergen County

Stone in Rutherford, NJ

Walkable neighborhoods with original 1920s brick. Most Rutherford jobs are tuckpointing and front-stoop replacements.

15 min from our yardZIP 07070Bergen CountyNJ Lic. #13VH10343500
15Min from yardRutherford, NJ
15-min drive
6 mi from Garfield yard
24-hour estimate
Written, no obligation
Bergen County
Rutherford, NJ 07070
Licensed & insured
NJ #13VH10343500
About working in Rutherford

What Rutherford masonry actually looks like

Site conditions, housing stock, and the kinds of projects we get called for in this town — the local context behind our estimates and recommendations.

Housing stock

Predominantly 1900–1935 single-family with original brick fronts and bluestone walkways; well-preserved housing stock.

Neighborhoods we serve
  • Park Avenue
  • West End
  • Lincoln Park
  • Union Avenue

Common project types

The work we get called for most in Rutherford, based on what the local building stock and site conditions tend to need.

  • Bluestone front-walk and step restorations
  • Façade tuckpointing on original 1920s brick
  • Period-appropriate brick stoop rebuilds
  • Garden walls in rear yards

Local site conditions

Conditions specific to Rutherford that shape how we approach prep, drainage, and material choice on every job.

  • Owners often want material that matches the original — careful stone yard selection becomes part of the job
  • Historic-feel neighborhoods mean Type S mortar is the wrong call almost everywhere
  • Many original walkways have settled — full re-bed is more common than spot repair
What we build

Stonewhat's included

Natural stone veneer, fireplace surrounds, pillars, and accent walls. We work in bluestone, fieldstone, ledgestone, and limestone — material is picked at the yard with you so the blend matches the house before a single piece is set.

  • Dry-stack and mortared natural stone veneer
  • Floor-to-ceiling fireplace surrounds with hearth and mantle
  • Stone pillars, columns, and entry monuments
  • Bluestone caps, treads, and pool coping
How we build it

Stone — start to finish

The four stages we run on every stone job. Same workflow whether it's a small fix or a full install.

1

Yard visit and blend

We meet you at the stone yard. Pull a sample pallet, lay it out on the ground, talk about colors and how the blend reads against your house. You leave knowing what's on the truck.

Stage 1 of 4
2

Substrate prep

Veneer needs a sound substrate — sheathing, weather-resistive barrier, galvanized lath, and a 1/2-inch scratch coat. Skipping any of those is how veneer walls fail in 5 years.

Stage 2 of 4
3

Stone selection and set

Stones sorted on the ground by face, size, and color before any setting. We pick each stone for its place in the wall — corners, transitions, and feature pieces placed first.

Stage 3 of 4
4

Joint, cap, and wash

Joints tooled to the chosen profile (raked, struck, or full-bedded depending on the look). Cap or mantle set last. Final wash with masonry detergent — no muriatic acid on natural stone.

Stage 4 of 4
Rutherford questions

About stone work in Rutherford

The four things people actually want to know before they sign an estimate.

Natural stone vs. cultured (manufactured) stone?

Natural stone is real stone — heavier, more variation, and ages well. Cultured stone is concrete cast in molds. From 20 feet they read similar. Up close, cultured stone repeats patterns and never weathers the same way. We install both; we'll tell you honestly when cultured is the right call (often for budget or a non-loadbearing accent wall).

Can I install stone veneer myself?

You can. Most homeowner failures are at the substrate (no WRB, wrong lath, scratch coat too thin) or at the cap (water gets in behind unsealed copings and shoves the wall off). If you DIY, the substrate is where to spend the time.

How heavy is full-bed stone veneer?

Roughly 40–50 lbs per square foot. That requires a shelf angle or a stem wall to carry the load. Thin veneer (1.5-inch cuts) is around 15 lbs and can hang on a properly prepared sheathed wall without a ledge.

Does stone veneer need maintenance?

Very little. Joints stay sound for 30+ years. Cap stones may need a re-bed at the 20-year mark if you're in a high-freeze location. Otherwise — wash it once a decade and you're done.

Free Estimate · Rutherford, NJ

Ready to talk through your stone project in Rutherford?

We're 15 minutes from your door. Tell us what you're building and we'll walk the site, check footings and drainage, and leave you a written estimate within 24 hours.

  • Site visit booked within 24–48 hours
  • 5-year written workmanship warranty
  • Licensed (NJ #13VH10343500), insured, family-owned
Or call for a fast quote(973) 272-5869